Detailed Product Description

Main Features

• Control of gates, barriers and other electronic devices from 500 telephone numbers with free calls and telephone number recognition + alarm system with an option for remote monitoring and control from GSM mobile phone;
• 7 Outputs (2 relay and 5 open collector);
• Each user can control up to 7 outputs (example provided below); 
• Configurable alert warning system for 4 telephone numbers;
• 2 analogue inputs with adjustable alarm area to control analogue sensors;
• 6 digital inputs for safety sensors to 2 of which it is possible to connect Thermal Sensor RTD-02;
• Voice and/or SMS notification of alarm situations in system;
• Option for connecting of an external microphone and installing of connection by DTMF command;
• Alerting in case of power supply failure and backup battery discharge;
• Built-in backup battery charger;
• Built-in controller of Touch Memory keys.

Technical specification

• GSM module (GSM900 / 1800MHz) built-in;
• 8 Inputs (Zones);
• Programmed entry levels (4 modes);
• Programmed zone names;
• 7 Outputs:
  • 2 realys;
  • 4 outputs such as "an open collector", GND, loading 0, 5A / 12V;
  • 1 output such as "an open collector", submits + 12V, current limited 0, 9A.
• Programmed outputs names;
• 4 numbers for:
  • voice calling;
  • SMS sending;
  • voice calling and SMS sending.
• Control by:
  • DTMF commands;
  • SMS commands.
• The voice module is built-in;
• Voice messages in the voice module can be programmed through PC;
• Option to connect external mic;
• Option for temperature measurement;
• The controller has an opportunity of connection of external button "ARM" or contact for reading key Touch memory DS1990A for change of a mode "ARM / DISARM";
• Programming via USB or RS-232 (Com port).

Main package contents

• CCU6225-LC 
• GSM antenna
• CD with software and user's manual
• Cable for programming controller via PC

Example:

User A can control output 2, so when user A call to module, module activate output 2.

User B can control outputs 3, 4, 5, so when user B call to module, module activate outputs 3, 4, 5.

User C can control 1, 2, 3, 4, 5, 6, 7 outputs, so when user C call to module, module activate all 7 outputs.

User D can control outputs 2, 7, so when user D call to module, module activate outputs 2 and 7.

And etc.

And all this with free calls and telephone number recognition.